Rockwell hardness machine

Get Instant Quality Info at iZito Now! There are different scales, denoted by a single letter, that use different loads or indenters.

Indentec Hardness Testing Machines Limited is a manufacturer and supplier of hardness testing machines, accessories, test blocks and indenters. We have a service department for after-sales support, offering regular UKAS accredited recalibration visits and repairs.

The model operates on two numbers of pencil cells.

Duramin hardness testing machines deliver more than twice the precision required by standards. Which method do you use? The depth of Penetration is inversely proportional to the hardness.

Both ball or diamond cone types of indenters are used in this test. There are three scales on the machine for taking hardness readings.

Vickers Hardness Testers Hardness testers for optical test methods cover different load ranges and feature equipment for various degrees of operator convenience. The indenter is forced into the test material under a minor preliminary load and the permanent effect is studied to know the hardness of the sample material.

These models are suitable for testing hardness of metals and alloys of all kinds, hard or soft, whether flat or round etc. The characteristic "C" shaped machine frame in robust and compact design (“S” for “small”) gives the product its name.

Universal hardness testers are designed to perform several hardness scales with one machine, in most cases for higher loads (5kgf). This testing method is most simple among all other methods and does not make use of any optical equipment and systems which makes it cost-effective also.

A rounded steel ball or conical diamond tip is pushed into the metal, and the depth of the indent is measured by the machine. It involves a mechanical operation where an indenting tool gets pressed against the metal subject surface at different rates while the indentation depth gets recorded. Testing technicians accurately control pressure application set according to what metal type they’re working with.

Mechatronic Control System Hardness Testers Models SE RAS, SE RASM, SE RAB- SE RAB-25 SE TWIN are manually operated. The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0. The accuracy is retained for years together due to hardened bush.

A hardened and ground stepped bush is fixed on top of main screw for location and rest surface. When equilibrium is reached (i.e. no further indentation at that load is happening), a datum position is established.

The diamond indenter shall be free from surface defects (cracks, chips, pits, etc.) and polished to such an extent that no unpolished part of its surface makes contact with the test piece when the indenter penetrates to a depth of 0. Rockwell superficial hardness testing. It is quite different from other prominent hardness tests like Brinell and Vickers hardness test.

This test gives you the direct reading of the hardness of the material in just a few seconds.

In the past years, we concentrate ourselves to manufacture the instrument of quality control and never change our business field. We improve the quality and accuracy every year, up to now, it is 1. When a range is liste it means that whatever variation occurs in the hardening process will fall within that range. A wide variety of rockwell hardness tester options are available to you, such as electronic.

You can also choose from hardness tester, auto testing machine rockwell hardness tester There are 5suppliers who sells rockwell hardness tester on Alibaba. Main functions and features: 1. It specifies a direct method for checking the main functions of the machine operation and an indirect method suitable for the overall checking of the machine.

The machine is powder coated for far better look. Their universally acclaimed ecos Workflow software is intuitive, easy to use and can include fracture measurement for carbides and ceramics as an option. And its values have a lot of meaning for practicing mechanics. Large LCD and Microchip control system, makes hardness testing be automatically operated.

The new frame design alllows the full 7. The application of these rulers covers almost all commonly used metal materials.